Category:LoDi
Lokstoredigital
The system works with the network technology.
Thus, there is no driver problem in the USB area.
The modules are set central with the Programmer.
The LoDi programmer is a Java tool, it runs on
- PC Windows from WIN7, 8 and 10
- Mac from Mountian Lion or higher
- Linux: Suse, Ubuntu etc.
The system disconnects:
lokstoredigital.de/hardware
The LoDi system basically consists of three main components:
LoDi-Rector and the LoDi-Booster:
Generates the track signal for the rolling stock.
LoDi-S88-Commander and the connected feedback modules:
Detect the locomotives on the track and report them back to the control software.
LoDi-Shift-Commander and the connected modules:
Operate and control switches, signals, lighting and room lighting control.
Driving DCC - Motorola
LoDi-Rektor Network -> DCC - MOT
This corresponds to a digital center
LoDi-Booster Power Amplifier
The normal booster can be used via the 3-pin connector.
The LoDi boosters are RailCom enabled.
LoDi-KSM Keyless Module
In a 2 wire system, a reverse loop is a bit problematic.
There is the reverse loop module for this.
Turn points - Lights - Devices
- LoDi-Shift-Commander Lighting and motor control center
- LoDi operator 4WD-AC Motor drive AC voltage
- LoDi-Operator 4WD-DC Motor drive or lighting DC voltage
- LoDi-Operator 16SDFL Dim LED control, flicker etc.
- lodi-operator-4-c-led Room lighting day / night
- LoDi SC-Booster Amplifier for the LoDi bus
Report Feedback
LoDi-TrainSpeed
LoDi-TrainSpeed
Software for LoDi
iTrain
WinDigipet
Applications
Attachments: with LoDi
Clubs with LoDi
Pages in category "LoDi"
The following 7 pages are in this category, out of 7 total.
